Functions from top left to bottom right:
ON: Lets the incoming control signal through.
UPWARDS: Triggers note at zero crossing when control signal is increasing.
DOWNWARDS: Triggers note at zero crossing when control signal is decreasing.
DURATION (10-1000ms), PITCH, VELOCITY: Sets outgoing note parameters.
MAP THIS: Map a control signal to this dial.
LEDs on the left and right go yellow as long as notes from UPWARDS and DOWNWARDS are on.
POSITIVE: Triggers a note as long as the control signal is above the center line.
POSITIVE LED: Indicates a note is triggered. If POSITIVE is switched off while a note is playing you create a “hanging” note and the LED stays yellow. Click on the LED to turn off the note.
POSITIVE PITCH: Sets the pitch of the POSITIVE note.
POSITIVE VELOCITY: Sets the velocity of the POSITIVE note.
NEGATIVE: Triggers a note as long as the control signal is below the center line.
NEGATIVE LED: Indicates a note is triggered. If NEGATIVE is switched off while a note is playing you create a “hanging” note and the LED stays yellow. Click on the LED to turn off the note.
NEGATIVE PITCH: Sets the pitch of the NEGATIVE note.
NEGATIVE VELOCITY: Sets the velocity of the NEGATIVE note.
To record the outgoing MIDI notes grab them on a separate MIDI track (see screenshot).